|
Manfrotto RH353 Reflector Holder with Mini Grip Head |  | Brand: Bogen
Category: Photography
Buy New: $57.09
as of 9/9/2010 16:18 EDT details
New (2) Used (1) from $54.95
Seller: Amazon.com
Rating:  5 reviews
Color: Silver
Media: Electronics
Shipping Weight (lbs): 1.6
Dimensions (in): 30.9 x 11.4 x 11.4
MPN: RH353
Model: RH353
UPC: 719821127154
EAN: 0719821127154
ASIN: B000GU9I6Q
Availability: Usually ships in 24 hours
| |
| Features:
| • | Three Section Telescoping Arm! | | • | Reflector Holder for Collapsible Discs |
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
This reflector holder comes with a mini grip head and will attach to any 1/2 inch to 3/4 inch light stand. This arm extends to 68' enabling it to hold most reflectors.
|
| Customer Reviews:
Best reflector holder I've tried. May 15, 2010
K. Nguyen (CA)
1 out of 1 found this review helpful
I tried a few different reflector holders and this one is solidly built and holds the reflector in any position that you wish. I tried some cheap off brand reflector arms that wouldn't even hold the reflector upright since it was too heavy (westcott 40" 5 in 1). Spend a little more money and get this and save yourself the grief of trying so many different reflectors just to save 10 bucks. Another great product by Manfrotto.
 sturdy but no standard adaptor April 22, 2010
Burkhard Kefes
2 out of 2 found this review helpful
Like all Manfrotto it is a great and sturdy tool. I like the rubber clips which are gently holding the reflectors. Best solution on the market.
The only thing I don't like is the adaptor which mounts it to a stand. It should have been equippedf with a standard adaptor, mounting at the end of stand. Instead you have to open the adaptor wide and slide it over the rod. It works great too. And on the second thought it leaves the end of the stand aavailable for other equipment.
Bogen/Manfrotto Quality June 8, 2009
But I'm feeling much better now... (Chicago, IL United States)
5 out of 6 found this review helpful
I'm setting up a home studio and have purchased products from a lot of manufacturers. Some of them are just plain disappointing while others are obviously quality constructed. Any Bogen/Manfrotto product that I've ever purchased has been higher priced but built much better than almost anybody else, plus you can get parts anywhere. I have a tripod that is probably over 10 years old, still looks and works like new, and I was able to go into a camera store and buy cable holders and quick release plates to fit it.
Everything works smoothly, and the reflector holders work great, something that I've read about other products clips breaking. I put it on a smallish Bogen nano stand with a 42" reflector, after a few hours the whole thing toppled over but luckily there was no damage. One advantage of everything major being made of steel.
You might save $10 and get a cheaper holder but I'll guarantee the aggravation of it not working right or breaking will cost you 100 times that, and what if it breaks in half in front of a client?
Manfrotto/Bogen RH353 Reflector holder June 1, 2009
C. Calder (Florence, SC)
7 out of 7 found this review helpful
The Manfrotto/Bogen RH353 Reflector holder is well made and very well thought out. The holder is made of tubular aluminum. It collapses down to 28" and extends via 2 extensions [2x11.4"] to a maximum of 63 inches. Each natural aluminum tube slides inside the next. The main tube has a hand grip, providing a way to move the reflector easily. The head comes two clamps that can be attached to any support structure [light stand] with a dia. of 5/8" or larger. It can be rotated to any angle--horizontal or vertical (360deg.) and has two knobs one applies pressure to the boom and the other to the support. The reflector clamps are made of hard rubber. The overall construction is excellent and should perform as designed for many years. This unit does cost more than another one available; however, the quality is there and worth it. I own many Manfrotto/Bogen products and NEVER been disappointed.
The unit did not come with any instructions. After some study, I loosened one of the head clamps and attached to the boom above the handle and just below the fixed reflector rubber clamp.
I am using this holder with the FlashPoint 42" 5 in 1 reflector and the Westcott 750 light stand.
Works wonderfuly January 26, 2009
J. Howard (Paso Robles, CA USA)
6 out of 6 found this review helpful
I always feel kind of funny reviewing things like this. I recently had to provide a review for a lens hood. Uhhh, it's a lens hood.
Anyway, this manfrotto reflector holder is perfect. It holds nicely, and is very easy to adjust. It is very nice in terms of quality construction and functionality. It extends out nicely to hold large reflectors or scrims. It was better than I expected. I highly recommend this one.
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
| |
![AmazonBasics Quilted Case for Small Electronics Including Cameras, Mobile Phones, GPS Units (Black) [Amazon Frustration-Free Packaging]](http://images.amazon.com/images/P/B002VPE1YS.01._AA75_PU_PU-5_.jpg)
